KHO HÀNG thiết bị tự động GNN | 68

S140800	STRUCTURAL STEEL & SUPPORTING MATERIAL
	SUPPLY OF STRUCTURAL STEEL IN FORM OF MILD STEEL ANGLES,
	CHANNELS, FLATS, ETC. FOR SUPPORTING VARIOUS
	ITEMS/ EQUIPMENT SUCH AS VARIOUS PANELS, CABLE
	TRAYS, SUPPORT FOR PUSH BUTTON STATIONS,
	JUNCTION BOXES, LIGHT FITTINGS, DB, ETC.
	INCLUDING DRILLING, WELDING, GROUTING,
	CHIPPING, BOLTING WITH SUPPLY OF REQUIRED
	HARDWARE FABRICATED AND INSTALLED.
	FABRICATED STRUCTURE SHALL BE SUITABLY PAINTED
	PAINTING COST SHALL BE CONSIDERED IN INSTALLATION
	CONTRACTOR SHALL VERIFY STEEL QUANTITY FROM DRG. &
	ONLY SAME SHALL BE SUPPLIED.  BALANCE SHALL BE TAKEN
	BACK BY CONTRACTOR AFTER WORK COMPLETION.
	PAINTING OF STEEL SHALL BE DONE BY MECHANICAL PAINTING
	CONTRACTOR OR SITE PAINTING SPECIALIST.
	MAKE OF STEEL:
S140801	H 200 X 200 X 8
S140802	H 150 X 150 X 7
S140803	C 150 X 75 X 6.5
S140804	C 100 X 50 X 5
S140805	C 75 X 40 X 5
S140806	L 65 X 65 X 6
S140807	L 50 X 50 X 6
S140808	L 40 X 40 X 5
S140809	L 25 X 25 X 3
S140810	MS PLATE 10 MM THICK
S140811	MS PLATE 5 MM THICK ( 200MM X 200MM )
S140812	MS STRIPS OF DIFFERENT SIZES ( 25 X 5 MS FLAT STRIP )
S140813	SLOTED ANGLES OF DIFFERENT SIZES
S140814	TIE RODS WITH THREADING
S140900	CABLE TRAYS AND ASSESSORIES
	SUPPLY OF CABLE TRAYS (VERTICAL AND 'HORIZONTAL)
	GI PRE-FABRICATED LADDER / PERFORATED WITH SUPPLY
	OF ALL NECESSARY HARDWARE INCLUDING ANCHOR FASTENER
	FOR INSTALLATION AND COUPLING. BOLTS, NUTS WASCHERS ETC.
	ALONG WITH TRAY
1)	FOR CABLE TRAY BENDS/ELBOW ETC. MTO  REFER ATTACHED ANNEXURE-1
2)	ANY SHORT FALL OF CABLE TRAY BENDS/ELBOWS ETC. SHALL BE
	ESTIMATED AND FABRICATED AT SITE.
3)	BENDS SHALL NOT BE USED FOR LIGHTING CABLE TRAYS AND SMALL TRAYS
4)	ALL CABLE TRAYS IN 2.5 METER LENGTH ONLY. CABLE TRAYS/BENDS/
	ELBOWS ETC. SHALL BE AS PER SPECIFICATION NO. 8455001-007-SP-020
5)	VENDOR SHALL SUPPLY CABLE TRAY CLAMPS FOR EVERY 2 METER
	FOR EACH CABLE TRAY SIZE AND ALSO COUPLING PLATE CONSIDERING
	2.5 METER STANDARD SUPPLY LENGTH
S140910	GI CABLE TRAYS  (HOT DIP GALVANISED )
S140910A	750 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140910B	600 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140910C	450 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140910D	300 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140910E	150 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 75 MM
	COLLAR HEIGHT )
S140910F	100 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 50 MM
	COLLAR HEIGHT )
	TRAYS FOR LIGHTING CABLES
S140910G	100 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 75 MM
	COLLAR HEIGHT )
S140910H	50 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 50 MM
	COLLAR HEIGHT )
S140920	FRP TYPE CABLE TRAYS
S140920A	750 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140920B	600 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140920C	450 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140920D	300 MM WIDE LADDER CABLE TRAY (2.5MM THICK, 100 MM
	COLLAR HEIGHT )
S140920E	150 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 75 MM
	COLLAR HEIGHT )
S140920F	100 MM WIDE PERFORATED CABLE TRAY (2.5MM THICK, 75 MM
	COLLAR HEIGHT )
S140950	CABLE TRAY COVERS
	SUPPLY OF CABLE TRAY COVERS USING
	16 GAUGE MS POWDER COATED SHEET
	SUPPLY OF COVERS SHALL BE COMPLETE WITH FIXING
	HARDWARE SUCH AS NUTS, BOLTS AND WASHERS.
	ALL CABLE TRAYS IN 2.5 METER LENGTH ONLY. CABLE TRAYS SHALL
	BE AS PER SPECIFICATION NO. 8455001-007-SP-020
S140951	750W CABLE TRAYS (FOR MV CABLE TRAYS IN  CELLAR ONLY)
S140952	600W CABLE TRAYS
S140953	450W CABLE TRAYS (FOR MAIN LIGHTING PANEL TRAYS RISER)
S140954	300W CABLE TRAYS (FOR MAIN LIGHTING PANEL TRAYS RISER)
S140955	150W CABLE TRAYS
S140956	100W CABLE TRAYS
S141000	EARTHING
	SUPPLY OF HARD DRAWN ELETROLYTIC GRADE BARE
	COPPER EARTH CONDUCTOR STRANDED ROPE AND PVC INSULATED
	STRANDED COPPER FLEXIBLE CABLE.
	NOTE - ALL PVC EARTHING CABLES SHALL HAVE  GREEN - YELLOW
	COLOURED (STRIPPED) INSULATION
S141101	25 X 3 MM BARE COOPER STRIP (FOR LIGHTNING ROOF CONDUCTOR, AND
	AND DOWN COMER )